Izdelki za jeklena jekla (579)

Synthetic mineral abrasive with angular particles, free of free silica. It is an abrasive with less environmental impact than iron silicate because it contains a low percentage of heavy metals. It provides cleaner surfaces and high productivity thanks to its lower density. Hardness: 6 mohs Shape: angular Density: 2.4-2.6 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

This high hardness shot is particularly suitable for shot peening of metal surfaces in compressed air systems. Hardness: 57-67 HRC Shape: angular Density: 7 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Abrasivo vegetal extremadamente suave, elaborado a partir de cáscara de nuez triturada, que permite obtener varios tamaños de grano correctamente calibrados. Tiene una excelente durabilidad. Dureza: 2,5 - 3,5 mohs Forma: angular Densidad: 1,0 - 1,2 g / cm3

Abrasif végétal extrêmement doux, fabriqué à partir d'épis de maïs broyés, nettoyés et filtrés dans diverses granulométries. Dureté: 4,5 mohs Forme: angulaire Densité: 0,9 g / cm3

Carboclean es un carbonato cálcico, de muy baja dureza y alta blancura, apto para el decapado en seco y húmedo, sin dañar la superficie tratada. Dureza: 2.5 - 3 mohs Forma: subangular Densidad: 2,5 g / cm3

Cette grenaille provient de la découpe de fil d'aluminium. En fonction de la matière première utilisée, différentes duretés sont obtenues, permettant de fournir différentes sphéricités (G1, G2 et G3). Dureté: 100-150 HV0.1 Forme: cylindrique ou sphérique (G1, G2 ou G3) Densité: 2,7 g / cm3

Extremely soft vegetable abrasive, made from crushed walnut shells, allowing several correctly calibrated grain sizes to be obtained. It has excellent durability. Hardness: 2.5 - 3.5 mohs Shape: angular Density: 1.0 - 1.2 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Produced from resin (urea), granulated and classified in different sizes. This abrasive cleans surfaces without causing roughness or dimensional alteration of the parts. Hardness: 3.5 mohs Shape: angular Density: 1.45 - 1.52 g / cm3 Quality: MIL-P-85891 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Abrasivo mineral sintético de partículas angulares, libre de sílice libre, extremadamente duro y de buena tenacidad. Dureza: 7 mohs Forma: angular Densidad: 3,7 g / cm3

Cr-Grit stainless steel shot is a very aggressive abrasive. Retains its angular shape for a long period of time, suitable for aggressive blasting operations. Hardness: ± 59 HRC Shape: angular Density: 7.9 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Ils sont fabriqués à partir d'un matériau céramique fondu à base de zirconium. Les sphères en céramique ont une densité plus élevée que les microsphères de verre, ce qui permet d'obtenir une plus grande efficacité de traitement. Ils ont une densité plus faible que la grenaille d'acier, ce qui permet des économies d'énergie et la préservation des pièces à traiter. Dureté: 7 - 7,5 mohs Forme: sphérique Densité: 3,8 g / cm3

Gama NAKROBLAST de boquillas decapantes, de excelente calidad y competitividad, para reducir los costos de su proceso productivo. Tenemos la posibilidad de suministrar otros modelos estándar o producir modelos especiales, en diferentes materiales.

Gamme de buses de dénudage NAKROBLAST, d'excellente qualité et compétitivité, pour réduire les coûts de votre processus de production. Nous avons la possibilité de fournir d'autres modèles standards ou de produire des modèles spéciaux, dans différents matériaux.

Están hechos de un material cerámico fundido a base de circonio. Las perlas de cerámica (Esferas de Circonio) tienen una densidad más alta que las microperlas de vidrio, que pueden lograr una mayor eficiencia de procesamiento. Tienen una densidad menor que la granalla de acero, lo que permite el ahorro energético y la conservación de las piezas a tratar. Dureza: 7-7,5 mohs Forma: esférica Densidad: 3,8 g / cm3

Product based on resin (melamine), then granulated and classified into different sizes. This abrasive cleans surfaces without causing roughness or dimensional alteration of the parts. Hardness: 4 mohs Shape: angular Density: 1.45 - 1.52 g / cm3 Quality: MIL-P-85891 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Synthetic mineral abrasive of angular particles, free of free silica, extremely hard and with good toughness. Hardness: 7 mohs Shape: angular Density: 3.7 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Producto a base de resina (melamina), luego granulado y clasificado en diferentes tamaños. Este abrasivo limpia superficies sin provocar asperezas ni alteración dimensional de las piezas. Dureza: 4 mohs Forma: angular Densidad: 1,45 - 1,52 g / cm3 Calidad: MIL-P-85891

Natural garnet sand is a non-active mineral abrasive which does not cause silicosis. It has high performance, ensuring efficiency and economical process with medium oxidation level. Its grains are microcrystalline, with more or less irregular rounded shapes. Hardness: 6-7.5 mohs Shape: irregular Density: 3.5-4.3 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Le sable grenat naturel est un abrasif minéral, non actif, qui ne provoque pas de silicose. Il a une haute performance, garantissant une efficacité et un processus économique avec un niveau d'oxydation moyen. Ses grains sont microcristallins, avec des formes arrondies plus ou moins irrégulières. Dureté: 6-7,5 mohs Forme: irrégulière Densité: 3,5-4,3 g / cm3

Wir sind seit 2011 durch die SGS gemaess der ISO 9001 zertifiziert

La arena granate natural es un abrasivo mineral inactivo que no produce silicosis. Tiene un alto rendimiento, asegurando eficiencia y un proceso económico con un nivel de oxidación medio. Sus granos son microcristalinos, con formas redondeadas más o menos irregulares. Dureza: 6-7,5 mohs Forma: irregular Densidad: 3,5-4,3 g / cm3

This shot comes from cutting the wire. Depending on the raw material used, different hardnesses are obtained, making it possible to provide different sphericity (G1, G2 and G3). Hardness: 44-56 HRC Shape: cylindrical or spherical (G1, G2 or G3) Density: 7.4 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Esta granalha é proveniente do corte de arame de inox AISI304. Dependendo das características da matéria-prima usada, são obtidas diferentes durezas, sendo possível o fornecimento de diferentes esfericidades (G1, G2 e G3). > Aplicação industrial de abrasivos > Bem-Vindo à BLASQEM! O seu Especialista em Granalhas, Abrasivos e Equipamentos. Dureza:40 - 55 HRC Forma:cilíndrica ou esférica (G1,G2 ou G3) Densidade:7,8 g/cm3

Fabriqué à partir de résine (polycarbonate), granulée et classée en différentes dimensions. Cet abrasif nettoie les surfaces sans provoquer de rugosité ou d'altération dimensionnelle des pièces. Dureté: 120 HRR Forme: angulaire Densité: 1,20 g / cm3

Stainless steel chrome shot is more economical than chrome nickel; it has been specially developed for cleaning operations requiring less gloss or corrosion resistance. Hardness: ± 50 HRC Shape: irregular Density: 7.9 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

This shot is produced by cutting zinc or zinc / aluminum wire. Depending on the characteristics of the raw material used, different hardnesses are obtained, making it possible to provide different sphericity (G1, G2 and G3). Hardness: 30-55 HV0.1 Shape: cylindrical or spherical (G1, G2 or G3) Density: 6.7 - 7.5 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Produced from resin (acrylic), granulated and classified in different dimensions. This abrasive cleans surfaces without causing roughness or dimensional alteration of the parts. Hardness: 3.5 mohs Shape: angular Density: 1.10 - 1.20 g / cm3 Quality: MIL-P-85891 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Dimensões máx: 4100x1400xzzz

Producido a partir de resina (urea), granulado y clasificado en diferentes tamaños. Este abrasivo limpia superficies sin provocar asperezas ni alteración dimensional de las piezas. Dureza: 3,5 mohs Forma: angular Densidad: 1,45 - 1,52 g / cm3 Calidad: MIL-P-85891

Producida a partir de resina (acrílica), granulada y clasificada en diferentes dimensiones. Este abrasivo limpia superficies sin provocar asperezas ni alteración dimensional de las piezas. Dureza: 3,5 mohs Forma: angular Densidad: 1,10 - 1,20 g / cm3 Calidad: MIL-P-85891